Littelfuse now offering ITV4030 series of Three-Terminal Surface Mount Battery with ampere range of 12A/15A/22A
It is a three-terminal surface mountable li-ion battery protector designed to guard against the damage caused by both overcurrent and overcharging. A fuse element is embedded to cut off the circuit when overcurrent issue happens. A heater is also directly embedded under the fuse element, it will generate heat to blow the fuse once overvoltage detected by IC or FET.
查看更多
Littelfuse announced the new SP33R6, a series of four-channel, low capacitance (0.2pF) TVS diode arrays. These robust diodes provide extremely low breakdown/turn-on voltages, making them ideal protectors of high-speed data lines with low voltage (-0.3 to +0.3V). Without performance degradation, they can safely absorb repetitive ESD strikes above the maximum level specified in IEC 61000-4-2 international standard (Level 4, ±8kV contact discharge).
The SPxxR6 TVS Diode Arrays are ideal for use in a wide range of data communications interfaces for consumer electronics, including:
USB 3.2 and 4.0,
Thunderbolt 3.0 and 4.0,
PCI Express 6.0.
The chipsets from USB 4.0 suppliers are known to be particularly susceptible to damage from voltages over 3.3V and the SP33R6 and SP00R6 TVS diode array series provides an exceptional solution for the protection of high-speed interfaces like USB 4.0 against repeated ESD strikes.
Using a multiline package footprint (SP33R6) or 0201-package (SP00R6) likely already on the circuit board, design engineers can expect ten times lower pass-through voltage when compared with existing solutions currently on the market.
查看更多
This new type of transponder was developed specially for applications where it is not possible to use one of our proven NeoTAG® transponder in Inlay, Plug or Flag versions due to the design requirement of the object. There are versions available for use with metallic and non-metallic objects. Depending on the required installation of the adhesive film transponders, different compositions can be realized with ferrite layers as the bottom or top layer. On non-metallic objects, there is no need for the ferrite film, thus creating very flat transponders. The outer dimensions can be adjusted variable to meet the application space requirements.
Due to its flexible design, this label transponder can be applied to both curved and bent surfaces.
查看更多
Littelfuse released the all-new 650V XPT™ GenX5™ Trench IGBTs. They are the latest addition to the discrete IGBT product portfolio. Class A5 is a low-speed device, optimized for switching frequencies up to 5kHz. You can find more details by the following PDF
查看更多
The 407A Series is a relatively high I2t fuse that can help protect infotainment systems from the hazards of high inrush current and surge current. The 407A series is AEC-Q200 compliant and allows these fuses to use in demanding automotive environments.
查看更多
Littelfuse zeptoSMDC Series PPTC is developed for overcurrent and overtemperature protection in mobile applications. It works as a "fail-safe" to protect battery management ICs and fuel gauges.
查看更多
Only 3.3 millimetres in diameter and with a height of 2.6 millimetres – those are the dimensions of the new NeoTAG® Plug G/MG3326. With this model, we have been able to reduce the TAG’s surface by another 40 per cent and its volume by 50 per cent.
As a result, this latest member of our NeoTAG® family is suitable for holes with a diameter of only 3 millimetres, and therefore for identification of even smaller parts, such as drill bits and milling inserts.
查看更多
Littelfuse POWR-SPEED series products offer optimized circuit protection at the extremely fast speed required to protect modern day power conversion devices. Such products are commonly found in numerous applications including pulp and paper industries, cranes and heavy-lifting equipment, processing industries, wastewater treatment plants, and various large factories and MRO facilities.
查看更多
DI6206 Series from Diotec is a high precision CMOS based low drop out voltage regulator. The device is compatible with low ESR ceramic capacitors. It provides output currents over 200 mA and fixed output voltages of 1.5 V to 3.6 V from an input voltage of 7.0 V. Special features like very low quiescent current and low dropout voltage enables usage in low power applications, and allows for longer operation times of battery-powered electronics. Parts include additionally a current limit and short-circuit protection. For more information download our new LDO flyer.
查看更多
